Posts Tagged 'Ternion Exhibit'

Ternion Corporation at ITEC 2013

Ternion Corporation exhibited FLAMES at the International Training and Education Conference (ITEC) show in Rome, Italy.

ITEC Show Information

May 22-24, 2013
Stand D142
Fiera di Roma in Italy

Learn more about ITEC

Meet with Ternion at ITEC 2013

Thank you to everyone who met with us at ITEC 2013! We enjoyed discussing your specific project requirements and the many ways that FLAMES can ...

View Page
0

Ternion Corporation at AlaSim 2012

Ternion Corporation demonstrated FLAMES at the Alabama Modeling and Simulation Conference and Exhibition (AlaSim International) in Huntsville, Alabama.

AlaSim 2012 Information

May 1-3, 2012
Booth: 26
Von Braun Center
Huntsville, AL, USA

AlaSim International is organized by the Alabama Modeling and Simulation Council (AMSC). It is designed to both showcase the breadth and depth of simulation activity in Alabama and collect, document, display and discuss the current state of simulation ...

View Page
0

Ternion Corporation at I/ITSEC 2011

Ternion’s exhibit at I/ITSEC 2011 focused on real world applications of FLAMES-based simulations. A demonstration of Ternion’s FLAMES-based Air Defense Systems Integrator (ADSI®) training simulation was on display at Ternion’s booth. Additionally, the FLAMES-based Command and Control Weapon System Part Task Trainer (C2WSPTT) was demonstrated at this year’s show.

Highlights from I/ITSEC 2011:

Field Deployable ADSI Training System: The exhibit featured Ultra Electronics’ ADSI system being driven by a FLAMES-based simulation.

Proven Solution ...

View Page
0

Ternion Corporation at I/ITSEC 2010

Ternion exhibited at I/ITSEC 2010. The exhibit focused on the new features of FLAMES® Version 9.0. Ternion also demonstrated multiple FLAMES-based Live Virtual Constructive applications, which included the U.S. Air Force’s Command and Control Weapon System Part Task Trainer (C2WSPTT).

Highlights from the show

FLAMES Demos

UAV Video feed – This FLAMES-based demo showed FLAMES ability to easily integrate and correlate simulated UAV video feed within an executing FLAMES scenario.

Live Virtual Constructive (LVC) – FLAMES’s LVC capabilities were demonstrated ...

View Page
0

Ternion Corporation at I/ITSEC 2009

Ternion’s exhibit at I/ITSEC 2009 focused on the new features of FLAMES Version 8.1 and demonstrated multiple Live Virtual Constructive applications of FLAMES, including the U.S. Air Force’s Command and Control Weapon System Part Task Trainer (C2WSPTT).

Highlights from the show

FLAMES Demos

UAV Video feed – Simulated UAV video can be generated using light-weight, easy to use applications that are fully integrated and correlated with an executing scenario. Like other FLAMES-based applications, no runtime fees are required.

Live Virtual Constructive (LVC) – A ...

View Page
0

Ternion Corporation at I/ITSEC 2008

Ternion’s exhibit at I/ITSEC 2008 focused on the release of the new FLAMES Enterprise Edition, which was announced at the show, as well as Live Virtual Constructive (LVC) and analysis applications of the product.

Highlights from the show:

New FLAMES Enterprise Edition Announced – A new configuration of the FLAMES product line, the Enterprise Edition, was announced at I/ITSEC during the Breakfast with Ternion. CDs with free licenses to the Enterprise Edition Runtime Suite were given out ...

View Page
0

Ternion Corporation at I/ITSEC 2007

Ternion’s exhibit at I/ITSEC 2007 showcased the flexibility of the FLAMES Simulation Framework and some of the ways it is being used by customers worldwide.

Highlights from I/ITSEC

Proven Solution for Live Virtual Constructive – The exhibit featured a virtual C4I system being driven by a FLAMES-based simulation.

Complex Analysis Made Simple – Multiple demos showed how FLAMES can be used for

View Page
0

Ternion Corporation at I/ITSEC 2006

At I/ITSEC 2006, Ternion demonstrated the power of FLAMES for testing, training, and analysis applications.

Highlights from I/ITSEC

A Better Way to Build High-Fidelity Virtual Simulators – Ternion’s exhibit included a flight simulator that demonstrated how FLAMES can support the development of high-fidelity virtual simulators.

FLAMES and PHX ModelCenter for Serious Systems Analysis Tasks – Phoenix Integration illustrated the benefits of using its product, PHX ModelCenter, with FLAMES in a joint product demo.

What’s New in FLAMES 6.1 – Ternion showed off new ...

View Page
0

NATO C3 Agency Demonstrated FLAMES at I/ITSEC 2005

Thank you to our loyal customers at the NATO C3 Agency (NC3A) for demonstrating their Integrated Command and Control software for Air Operations (ICC) and their FLAMES-based ICC Training Capability (ITC).

The “NATO-wide Integrated Command and Control software for Air Operations” (ICC) is an integrated C3I environment that provides information management and decision support to NATO Combined Air Operations Centers (CAOCs) during peacetime, exercise and wartime. ICC also provides related mission-essential ...

View Page
0

Ternion Corporation at I/ITSEC 2005

Ternion Corporation participated in the 2005 Interservice/Industry Training, Simulation, & Education Conference (I/ITSEC) December 6-9 in Orlando, FL. We showcased our newly released FLAMES 6.0.

In addition, Ternion was represented by multiple customers and many different booths throughout the show floor. The US Air Force 505th Training Group demonstrated the Command and Control Weapons System Part Task Trainer (C2WSPTT) in the Ternion booth. Other customers demonstrating FLAMES on the show floor were ...

View Page
0

US Air Force 505th Demonstrated FLAMES at I/ITSEC 2005

We extend a huge thanks to our wonderful customers, the 505th Communications Squadron (505 CS) for being a part of our booth at I/ITSEC 2005 and demonstrating their FLAMES application, the Command and Control Weapons System Part Task Trainer (C2WSPTT).

The 505 CS under the 505th Command and Control Wing (505 CCW) developed the C2WSPTT to provide a low-cost, on-demand, resident modeling and simulation (M&S) capability to stimulate an Air ...

View Page
0

Ternion Corporation at I/ITSEC 2004

Ternion Corporation participated in the 2004 Interservice/Industry Training, Simulation, & Education Conference (I/ITSEC) December 6-9 in Orlando, FL. We showcased our newly released option to FLAMES, Enhanced 3D.

In addition, Ternion was represented by multiple customers and many different booths throughout the show floor. The US Air Force 505th Training Group demonstrated the Command and Control Weapons System Part Task Trainer (C2WSPTT) in the Ternion booth. Other customers demonstrating FLAMES ...

View Page
0

Ternion Corporation at I/ITSEC 2003

Ternion Corporation participated in the 2003 Interservice/Industry Training, Simulation, & Education Conference (I/ITSEC) December 1-4 in Orlando, FL. We showcased our newest option to FLAMES, Enhanced 3D Visualization, which is planned for release in 2004.

In addition, Ternion was represented by multiple customers and many different booths throughout the show floor. Applied Research Associates (ARA) and the US Air Force Command and ...

View Page
0

ARA and AFRL/MN Demonstrated FLAMES at I/ITSEC 2003

Using the FLAMES architecture, Applied Research Associates (ARA) is supporting the Air Force Research Lab Munitions Directorate (AFRL/MN) in developing weapon systems for the next decade. FLAMES enabled ARA to develop system-of-systems simulation models very quickly and efficiently. In particular, the FLAMES architecture supports independent equipment modeling, allowing ARA to build models for various communications equipment, sensors, and munitions ...

View Page
0

NATO C3 Agency Demonstrated FLAMES at I/ITSEC 2003

Thank you to our loyal customers at the NATO C3 Agency (NC3A) for demonstrating their Integrated Command and Control software for Air Operations (ICC) and their FLAMES-based ICC Training Capability (ITC).

The “NATO-wide Integrated Command and Control software for Air Operations” (ICC) is an integrated C3I environment that provides information management and decision support to NATO Combined Air Operations Centers (CAOCs) ...

View Page
0

Quantum3D Demonstrated FLAMES at I/ITSEC 2003

Quantum3D®, a high-end Image Generator (IG) company, has put together a solution for integrating a Semi-Automated Forces (SAF)-based simulation with a 60hz IG. To accomplish this, the following issues had to be resolved:

  1. DIS and HLA bring dead-reckoning problems such as low PDU rates
  2. The following requirements must be met by the SAF:
    • 60hz hook into a SAF to populate a real-time scenario stream
    • Method to hook up a ...
View Page
0

PEO STRI EPG C3Driver Demonstrated FLAMES at I/ITSEC 2003

As subcontractors to Lockheed Martin Information Systems, Ternion Corporation supports the U.S. Army’s Command, Control, and Communications Driver (C3D) program with the development of the Command and Control Low Overhead Driver (C2LOD). Built using FLAMES, C2LOD provides a common simulation for testing each of the C4I systems. C2LOD simulates each unit in a battle, including weapons, sensors, platforms, communications, and the soldier’s cognitive behavior. Messages are generated in precise military ...

View Page
0
Page 1 of 2 12