Posts Tagged 'FLAMES Release'

FLAMES 12.0 Released

Huntsville, AL – December 2, 2013 – Ternion® Corporation is pleased to announce the release of FLAMES®, version 12.0. This new version includes well over 100 changes and enhancements that make it the most powerful and easy-to-use version of FLAMES ever released.

FLAMES 12.0 Enhancements

Some of the most significant enhancements in version 12.0 are summarized below. See the What’s New section of the FLAMES documentation for additional details on these and other enhancements.

User Interface Enhancements. Many enhancements have been made to ...

View Page
0

FLAMES 11.0.2 Released

Huntsville, AL – July 26, 2013  FLAMES® version 11.0.2 has been released. This version is an incremental release correcting minor issues found in the FLAMES Runtime Suite since version 11.0.1 was released. The following updates are included:

  • All the updates included in version 11.0.1
  • A correction to a problem that intermittently caused a crash in FORGE when working with pattern parameters
  • A correction to intermittent problems with the zoom slider in the 2D view in ...
View Page
0

FLAMES 10.0.3 Released

Huntsville, AL – May 8, 2012 – FLAMES®, version 10.0.3 has been released. This version is an incremental release that corrects one problem found in the FLAMES Runtime Suite since version 10.0 was released, and it adds one new feature. The following updates are included:

  • All the updates included in version 10.0.2.
  • A correction to a problem that intermittently caused a crash in FORGE when saving datasets.
  • A new feature in the Windows version of ...
View Page
0

FLAMES 10.0.2 Released

Huntsville, AL – March 6, 2012 – FLAMES®, version 10.0.2 has been released. This version is an incremental release that corrects a few small problems in version 10.0 and 10.0.1 of the FLAMES Runtime Suite. The following updates are included:

  • All the updates included in version 10.0.1.
  • An updated copy of the FLAMES un-installer that works correctly on Windows NT computers.
  • An updated copy of the main FLAMES dynamic/shared runtime library that corrects some minor ...
View Page
0

FLAMES 10.0.1 Released

Huntsville, AL – January 17, 2012 – FLAMES®, version 10.0.1 has been released. This version is an incremental release that corrects one critical problem and a few smaller problems in version 10.0 of the FLAMES Runtime Suite. The following updates are included:

  • An updated copy of all the FLAMES bundled component libraries. The licensing information in the original component libraries bundled with version 10.0 was inadvertently set to expire on 15 January 2012. Therefore, none ...
View Page
0

FLAMES 9.1.2 Released

Huntsville, AL – January 17, 2012 – FLAMES®, version 9.1.2 has been released. This version is an incremental release that corrects a critical problem discovered in versions 9.1 and 9.1.1 of the FLAMES Runtime Suite. The following updates are included:

  • An updated copy of all the FLAMES bundled component libraries. The licensing information in the original component libraries bundled with versions 9.1 and 9.1.1 was inadvertently set to expire on 15 January 2012. ...
View Page
0

2011 Breakfast with Ternion Corporation

Ternion Corporation and the FLAMES User Group hosted a breakfast during the 2011 I/ITSEC Conference. At the event, Ternion’s president, Brad Spearing, delivered a presentation on FLAMES. Each attendee received a free, permanent license and installation CD for the FLAMES 10.0 Runtime Suite.

Presentation Highlights:

View Page
0

FLAMES 10.0 Released

Huntsville, AL – November 29, 2011 – Ternion Corporation is pleased to announce the release of FLAMES, version 10.0. Users will find this new version both easier to use and more powerful, and developers will be able to add more custom capability with even less effort.

FLAMES 10.0 Main Enhancements:

Enhanced User Interface

Ternion rewrote the ENTIRE low-level graphical user interface (GUI) subsystem of FLAMES to be based on Qt, an open-source, cross-platform application and user interface framework. This was a ...

View Page
0

FLAMES 9.1.1 Released

Huntsville, AL – August 25, 2011 – FLAMES®, version 9.1.1 has been released. This version is an incremental release that corrects a few small problems discovered in the Windows version of FLAMES 9.1. The following is a summary of the problems that were corrected. If you are using version 9.1 and have experienced any of the problems described below, you should upgrade to version 9.1.1. Otherwise, there is no need to upgrade.

  • In version 9.1, ...
View Page
0

FLAMES 9.1 Released

Huntsville, AL – March 29, 2011 – Ternion® Corporation is pleased to announce the release of FLAMES, version 9.1. This new version has been created to make FLAMES® more affordable for a larger number of organizations.

Creating scenarios with FLAMES Simulation Framework

In version 9.1, the FLAMES Development Suite is subdivided into eight separately priced products:

  • Core Development
  • 3D Option
  • Multithreaded Execution Option
  • Analysis ...
View Page
0

FLAMES 9.0 Released

Huntsville, AL – November 30, 2010 – Ternion® Corporation is pleased to announce the release of FLAMES®, version 9.0. Like the previous version, version 9.0 achieves a goal we have been working toward for many years. FLAMES now supports built-in semi-automated forces (SAF) capability.

Many other exciting enhancements are also included in this new version, some of which are summarized below. See the What’s New section of the FLAMES documentation for additional details on these and other enhancements.

FLAMES 9.0 Enhancements:

View Page

0

2010 Breakfast with Ternion Corporation

Ternion Corporation and the FLAMES User Group hosted a breakfast during the 2010 I/ITSEC Conference. At the event, Ternion’s president, Brad Spearing, previewed new features in FLAMES 9.0. Each attendee received a free, permanent license and installation CD for the FLAMES 9.0 Runtime Suite.

Presentation Highlights

View Page
0

Ternion Reduces FLAMES Enterprise Edition Price by 40 Percent

May 18, 2010 – Ternion Corporation today announced a 40 percent price reduction on its FLAMES Enterprise Edition Development Suite, a powerful framework for developing custom constructive simulations and interfaces to other live, virtual, and constructive (LVC) simulations.

“FLAMES already contains the right mix of robust features and off-the-shelf capability for LVC simulation,” states Barlow Blake, Director of Sales and Marketing, Ternion Corporation. “The new, lower price of FLAMES will allow a larger ...

View Page
0

FLAMES 8.1 Released

Huntsville, AL – December 21, 2009 – Ternion Corporation is pleased to announce the release of FLAMES, version 8.1. This version includes some of the most exciting enhancements ever added to FLAMES. If you’ve looked at FLAMES before, you will definitely want to look at it again.

Some of the most obvious enhancements in version 8.1 are summarized below. See the What’s New section of the FLAMES documentation for additional details on these and other enhancements.

FLAMES 8.1 Enhancements:

New Command Editor. ...

View Page
0

2009 Breakfast with Ternion Corporation

Ternion Corporation and the FLAMES User Group hosted a breakfast during the 2009 I/ITSEC Conference. At the event, Ternion’s president, Brad Spearing, previewed new features in FLAMES 8.1. Each attendee received a free, permanent license and installation CD for FLAMES 8.1, which includes a new video tutorial and demonstration scenarios.

Presentation Highlights:

View Page
0

FLAMES 8.0.1 Released

Huntsville, AL – February 16, 2009 – Ternion Corporation is pleased to announce the release of FLAMES, version 8.0.1. This is the first full release of the new FLAMES Enterprise and Professional Editions. Version 8.0 was only released as a runtime version of the FLAMES Enterprise Edition on December 2, 2008.

Some of the most obvious new features of version 8.0.1 are summarized below. See the What’s New section of the FLAMES documentation for additional details on these ...

View Page
0

FLAMES Enterprise Edition Released

Huntsville, AL – December 2, 2008 – Ternion announced the release of the FLAMES Enterprise Edition at I/ITSEC during the Breakfast with Ternion. Licenses to the base runtime product are free—a revolutionary concept in the commercial simulation industry. Free installation CDs and permanent licenses to the Enterprise Edition Runtime Suite, version 8.0, were given out at Ternion’s I/ITSEC exhibit.

The FLAMES Enterprise Edition Development Suite was released with version 8.0.1, on February 16, 2009.

FLAMES Enterprise Edition Benefits

2008 Breakfast with Ternion Corporation

Ternion Corporation and the FLAMES User Group hosted a breakfast during the 2008 I/ITSEC Conference. At the event, Ternion’s president, Brad Spearing, announced the release of FLAMES Enterprise Edition with free, unlimited runtime licenses. Each attendee received a free, permanent license and installation CD for the Enterprise Edition Runtime Suite, which includes a video overview and tutorial.

Presentation Highlights

  • State of military simulation
  • Overview of FLAMES
  • Product announcement of FLAMES Enterprise Edition
  • Contents of free
View Page
0

FLAMES 7.1 Released

Huntsville, AL – June 6, 2008 – Ternion Corporation is pleased to announce the release of FLAMES, version 7.1. This is a relatively small release because Ternion has some exciting new features that it wants to provide to customers quickly. A few of these new features are summarized below. See the What’s New section of the FLAMES 7.1 documentation for additional details on these and other product enhancements.

FLAMES 7.1 Enhancements:

Enhanced Analysis Option Enhancements. FIRE has been enhanced to ...

View Page
0

FLAMES 7.0.1 Released

Huntsville, AL – March 3, 2008 – FLAMES, version 7.0.1 has been released. This version is an incremental release that corrects one small problem discovered in version 7.0 of the FLAMES Enhanced Analysis option. The problem occurs when you are executing FIRE in multiple scenario execution mode using the -ne command line argument or when you are using FIRE with PHX ModelCenter®. If you are using version 7.0 of ...

View Page
0

FLAMES 7.0 Released

Huntsville, AL – February 15, 2008 – Ternion Corporation is pleased to announce the release of FLAMES, version 7.0. Originally numbered 6.2, the version contained so many exciting and significant improvements that it was renumbered 7.0. Some of these enhancements are summarized below. See the What’s New section of the FLAMES 7.0 documentation for additional details on these and other product enhancements.

FLAMES 7.0 Enhancements:

Scenario Execution in FORGE. One of the most dramatic and useful enhancements to FLAMES is ...

View Page
0

2007 Breakfast with Ternion Corporation

Ternion Corporation and the FLAMES User Group hosted a breakfast during the 2007 I/ITSEC Conference. At the event, Ternion’s president, Brad Spearing, talked about why customers worldwide have chosen FLAMES as their constructive simulation framework for a variety of different applications.

Presentation Highlights

View the event presentation.

Event ...

View Page
0

2006 Breakfast with Ternion Corporation

The unique features that make FLAMES one of the most robust and flexible simulation frameworks on the market were the focus of Ternion Corporation’s presentation during the FLAMES User Group Meeting and Breakfast during the 2006 I/ITSEC Conference.

Presentation Highlights

  • Overview of FLAMES
  • New Features in FLAMES 6.1
  • Plans for Future FLAMES Releases
  • Overview of Ternion’s Booth at I/ITSEC
  • Plans for the upcoming FLAMES User Group Conference

View the event ...

View Page
0

FLAMES 6.1.1 Released

Huntsville, AL – November 2, 2006 – Ternion Corporation is pleased to announce the release of FLAMES version 6.1.1. This new version corrects minor errors found in version 6.1. If you have already received FLAMES version 6.1, you will automatically receive version 6.1.1 in the mail. If you have not received 6.1 and have active software maintenance, you may request 6.1.1 at no additional cost. Please contact customer support to make your request.

View Page
0
Page 1 of 2 12