Posts Tagged 'FLAMES-Based Simulations'

Ternion Corporation at ITEC 2013

Ternion Corporation exhibited FLAMES at the International Training and Education Conference (ITEC) show in Rome, Italy.

ITEC Show Information

May 22-24, 2013
Stand D142
Fiera di Roma in Italy

Learn more about ITEC

Meet with Ternion at ITEC 2013

Thank you to everyone who met with us at ITEC 2013! We enjoyed discussing your specific project requirements and the many ways that FLAMES can ...

View Page
0

Ternion Corporation at I/ITSEC 2011

Ternion’s exhibit at I/ITSEC 2011 focused on real world applications of FLAMES-based simulations. A demonstration of Ternion’s FLAMES-based Air Defense Systems Integrator (ADSI®) training simulation was on display at Ternion’s booth. Additionally, the FLAMES-based Command and Control Weapon System Part Task Trainer (C2WSPTT) was demonstrated at this year’s show.

Highlights from I/ITSEC 2011:

Field Deployable ADSI Training System: The exhibit featured Ultra Electronics’ ADSI system being driven by a FLAMES-based simulation.

Proven Solution for ...

View Page
0

Ternion Corporation at I/ITSEC 2010

Ternion exhibited at I/ITSEC 2010. The exhibit focused on the new features of FLAMES® Version 9.0. Ternion also demonstrated multiple FLAMES-based Live Virtual Constructive applications, which included the U.S. Air Force’s Command and Control Weapon System Part Task Trainer (C2WSPTT).

Highlights from the show

FLAMES Demos

UAV Video feed – This FLAMES-based demo showed FLAMES ability to easily integrate and correlate simulated UAV video feed within an executing FLAMES scenario.

Live Virtual Constructive (LVC) – FLAMES’s LVC capabilities were demonstrated ...

View Page
0

Ternion Corporation at I/ITSEC 2009

Ternion’s exhibit at I/ITSEC 2009 focused on the new features of FLAMES Version 8.1 and demonstrated multiple Live Virtual Constructive applications of FLAMES, including the U.S. Air Force’s Command and Control Weapon System Part Task Trainer (C2WSPTT).

Highlights from the show

FLAMES Demos

UAV Video feed – Simulated UAV video can be generated using light-weight, easy to use applications that are fully integrated and correlated with an executing scenario. Like other FLAMES-based applications, no runtime fees are required.

Live Virtual Constructive (LVC) – A ...

View Page
0

Taiwan Military Selects FLAMES for Training System

November 20, 2009 The Chung-Shan Institute of Science and Technology within the Taiwan Military selected FLAMES as the simulation framework for a new training system for command and control, distributed wargaming, and weapon systems applications. Formosa Scientific, Inc. of Taipei, Taiwan, will ...

View Page
0

Ternion Corporation at I/ITSEC 2008

Ternion’s exhibit at I/ITSEC 2008 focused on the release of the new FLAMES Enterprise Edition, which was announced at the show, as well as Live Virtual Constructive (LVC) and analysis applications of the product.

Highlights from the show:

New FLAMES Enterprise Edition Announced – A new configuration of the FLAMES product line, the Enterprise Edition, was announced at I/ITSEC during the Breakfast with Ternion. CDs with free licenses to the Enterprise Edition Runtime Suite were given out ...

View Page
0

Ternion Corporation at I/ITSEC 2007

Ternion’s exhibit at I/ITSEC 2007 showcased the flexibility of the FLAMES Simulation Framework and some of the ways it is being used by customers worldwide.

Highlights from I/ITSEC

Proven Solution for Live Virtual Constructive – The exhibit featured a virtual C4I system being driven by a FLAMES-based simulation.

Complex Analysis Made Simple – Multiple demos showed how FLAMES can be used for

View Page
0

Ternion Corporation at I/ITSEC 2006

At I/ITSEC 2006, Ternion demonstrated the power of FLAMES for testing, training, and analysis applications.

Highlights from I/ITSEC

A Better Way to Build High-Fidelity Virtual Simulators – Ternion’s exhibit included a flight simulator that demonstrated how FLAMES can support the development of high-fidelity virtual simulators.

FLAMES and PHX ModelCenter for Serious Systems Analysis Tasks – Phoenix Integration illustrated the benefits of using its product, PHX ModelCenter, with FLAMES in a joint product demo.

What’s New in FLAMES 6.1 – Ternion showed off new ...

View Page
0

NATO C3 Agency Demonstrated FLAMES at I/ITSEC 2005

Thank you to our loyal customers at the NATO C3 Agency (NC3A) for demonstrating their Integrated Command and Control software for Air Operations (ICC) and their FLAMES-based ICC Training Capability (ITC).

The “NATO-wide Integrated Command and Control software for Air Operations” (ICC) is an integrated C3I environment that provides information management and decision support to NATO Combined Air Operations Centers (CAOCs) during peacetime, exercise and wartime. ICC also provides related mission-essential ...

View Page
0

US Air Force 505th Demonstrated FLAMES at I/ITSEC 2005

We extend a huge thanks to our wonderful customers, the 505th Communications Squadron (505 CS) for being a part of our booth at I/ITSEC 2005 and demonstrating their FLAMES application, the Command and Control Weapons System Part Task Trainer (C2WSPTT).

The 505 CS under the 505th Command and Control Wing (505 CCW) developed the C2WSPTT to provide a low-cost, on-demand, resident modeling and simulation (M&S) capability to stimulate an Air ...

View Page
0

Ternion Corporation at I/ITSEC 2005

Ternion Corporation participated in the 2005 Interservice/Industry Training, Simulation, & Education Conference (I/ITSEC) December 6-9 in Orlando, FL. We showcased our newly released FLAMES 6.0.

In addition, Ternion was represented by multiple customers and many different booths throughout the show floor. The US Air Force 505th Training Group demonstrated the Command and Control Weapons System Part Task Trainer (C2WSPTT) in the Ternion booth. Other customers demonstrating FLAMES on the show floor were ...

View Page
0

NASIC Wins 2004 M&S Award

October 27, 2005 – Ternion Corporation is pleased to announce that the National Air and Space Intelligence Center’s Integrated Air Defense Systems Modeling & Simulation Group (NASIC/IADS/M&S Group)  has won the 2004 US Air Force Modeling and Simulation (USAF M&S) Analysis Award with their FLAMES-based Simulation. See the award information below:

Description:
2004 USAF M&S AWARDS

SUMMARY OF ACHIEVEMENTS
Analysis
Integrated Air Defense (IADS) M&S Group, National Air and Space Intelligence Center/IADS Division, Wright-Patterson AFB, OH

  • The ...
View Page
0

Ternion Corporation at I/ITSEC 2004

Ternion Corporation participated in the 2004 Interservice/Industry Training, Simulation, & Education Conference (I/ITSEC) December 6-9 in Orlando, FL. We showcased our newly released option to FLAMES, Enhanced 3D.

In addition, Ternion was represented by multiple customers and many different booths throughout the show floor. The US Air Force 505th Training Group demonstrated the Command and Control Weapons System Part Task Trainer (C2WSPTT) in the Ternion booth. Other customers demonstrating FLAMES ...

View Page
0

NATO C3 Agency Demonstrated FLAMES at I/ITSEC 2003

Thank you to our loyal customers at the NATO C3 Agency (NC3A) for demonstrating their Integrated Command and Control software for Air Operations (ICC) and their FLAMES-based ICC Training Capability (ITC).

The “NATO-wide Integrated Command and Control software for Air Operations” (ICC) is an integrated C3I environment that provides information management and decision support to NATO Combined Air Operations Centers (CAOCs) ...

View Page
0

Quantum3D Demonstrated FLAMES at I/ITSEC 2003

Quantum3D®, a high-end Image Generator (IG) company, has put together a solution for integrating a Semi-Automated Forces (SAF)-based simulation with a 60hz IG. To accomplish this, the following issues had to be resolved:

  1. DIS and HLA bring dead-reckoning problems such as low PDU rates
  2. The following requirements must be met by the SAF:
    • 60hz hook into a SAF to populate a real-time scenario stream
    • Method to hook up a ...
View Page
0
Page 1 of 2 12