Finnish Naval Research Institute Selects FLAMES for Operational Analysis

December 13, 2012 – The Finnish Naval Research Institute (FNRI) purchased FLAMES development licenses to support operational analysis and collaboration with other organizations related to the Finnish Defence Forces.

The Naval Research Institute specialises in underwater military research supporting the development of the Navy and in testing the newest technology used in the Navy (Espoo).

Continue Reading
0

2012 Breakfast with Ternion Corporation

Ternion Corporation and the FLAMES User Group hosted a breakfast during the 2012 I/ITSEC Conference. At the event, Ternion’s president, Brad Spearing, delivered a presentation on FLAMES. Each attendee received a free, permanent license and installation DVD for the FLAMES 11.0 Runtime Suite.

Event Details:
Tuesday, December 4, 2012, from 9:00 – 10:30 a.m.
Rosen Centre Hotel, Level 2, Salons 3&4, Orlando, Florida

Presentation Highlights:

  • Introduction to FLAMES
  • Overview of the new ...
Continue Reading
0

Diamond Visionics’ GenesisRTX IG Interfaces with FLAMES

Tucson, AZ – December 3, 2012Cogent3D, Inc. announced that Diamond Visionics (DVC) has interfaced its GenesisRTX™ image generator (IG) with Ternion’s FLAMES® FORGE/FIRE software with its new CIGI functionality to drive moving models in GenesisRTX IG’s high-density scenarios.

GenesisRTX IG provides high-fidelity, real-time image generation without requiring off-line terrain database generation, dynamically constructing 3D scenes at run-time directly from GIS source data. This affords GenesisRTX customers cost savings over the ...

Continue Reading
0

Ternion Corporation at I/ITSEC 2012

Ternion’s exhibit at I/ITSEC 2012 focused on real world applications of FLAMES-based simulations. A demonstration of Ternion’s FLAMES-based Air Defense Systems Integrator (ADSI®) training simulation was on display at Ternion’s booth. Additionally, the FLAMES-based Command and Control Weapon System Part Task Trainer (C2WSPTT) was demonstrated at this year’s show.

Event Details:

December 3-6, 2012
Orange County Convention Center – West Building
9800 International Drive, Orlando, FL, USA
Ternion Booth #1471

Highlights from I/ITSEC 2012:

Field Deployable ADSI Training System

The exhibit ...

Continue Reading
0

FLAMES 11.0 Released

Huntsville, AL – November 30, 2012 – Ternion® Corporation is pleased to announce the release of FLAMES®, version 11.0. This new version includes many enhancements that simplify the development of custom models. FLAMES users will also benefit from several enhancements that make scenarios easier to create and execute.

FLAMES 11.0 Enhancements

Version 11.0 includes enhancements in over 75 areas. Some of the most significant enhancements are summarized below. See the What’s New section of the FLAMES documentation for additional details on these ...

Continue Reading
0

General Dynamics Selects Ternion for CAC2S Simulation

October 5, 2012 – Ternion Corporation was selected to be part of a General Dynamics C-4 Systems-led team that will be building up to four Engineering Development Models and nine Limited Deployment Units of the Processing and Display/Sensor Data Subsystem (PDS/SDS) for Increment 1, Phase 2 of the Common Aviation Command and Control System (CAC2S). The General Dynamics-designed subsystem will be smaller and more energy-efficient, and will increase the mobility and agility of Marines operating on land, in the air ...

Continue Reading
0

Ternion Makes MT2 Top Simulation & Training List 2012

October 2012 – For the tenth year in a row, Military Training Technology (MT2) magazine recognized Ternion Corporation on its prestigious Top Simulation & Training Companies List. The awarded Core Competencies areas included Constructive Simulation, Software and Training Services.

The publication first presented this honor to Ternion Corporation in 2003.

Read more at Military Training Technology online.

Continue Reading
0

Ternion Quoted in MT2 Serious Gaming Article

September 2012 – Ternion Corporation President Brad Spearing was quoted in a Military Training Technology (MT2) magazine article titled “Serious Gaming Update”. Here are some excerpts from the article.

“Game software is seldom designed to be customized by those other than the original developers,” said Spearing. “In the defense industry, where simulation requirements are numerous and everchanging, not being able to use their own developers to customize the game can be a serious problem ...

Continue Reading
0

FLAMES 10.0.3 Released

Huntsville, AL – May 8, 2012 – FLAMES®, version 10.0.3 has been released. This version is an incremental release that corrects one problem found in the FLAMES Runtime Suite since version 10.0 was released, and it adds one new feature. The following updates are included:

  • All the updates included in version 10.0.2.
  • A correction to a problem that intermittently caused a crash in FORGE when saving datasets.
  • A new feature in the Windows version of ...
Continue Reading
0

Ternion Corporation at AlaSim 2012

Ternion Corporation demonstrated FLAMES at the Alabama Modeling and Simulation Conference and Exhibition (AlaSim International) in Huntsville, Alabama.

AlaSim 2012 Information

May 1-3, 2012
Booth: 26
Von Braun Center
Huntsville, AL, USA

AlaSim International is organized by the Alabama Modeling and Simulation Council (AMSC). It is designed to both showcase the breadth and depth of simulation activity in Alabama and collect, document, display and discuss the current state of simulation ...

Continue Reading
0

Erkaweet Conducts FLAMES Training Event

May 13, 2012 – Erkaweet LLE in Abu Dhabi, United Arab Emirates conducted a one week, on-site FLAMES training event which included the Introductory User Course, the Developer Training Course, and specifically-requested material.

The focus of the training event was to increase the students’ familiarity and experience with FLAMES, and supplement their custom development efforts in the areas of:

  • 3D display development
  • Using the SQL database in FLAMES scenarios
  • Inputting data from external device (sensor)
  • Controlling units during scenario execution

Ternion’s UAE, Middle East, and North ...

Continue Reading
0

FLAMES 10.0.2 Released

Huntsville, AL – March 6, 2012 – FLAMES®, version 10.0.2 has been released. This version is an incremental release that corrects a few small problems in version 10.0 and 10.0.1 of the FLAMES Runtime Suite. The following updates are included:

  • All the updates included in version 10.0.1.
  • An updated copy of the FLAMES un-installer that works correctly on Windows NT computers.
  • An updated copy of the main FLAMES dynamic/shared runtime library that corrects some minor ...
Continue Reading
0

FLAMES 10.0.1 Released

Huntsville, AL – January 17, 2012 – FLAMES®, version 10.0.1 has been released. This version is an incremental release that corrects one critical problem and a few smaller problems in version 10.0 of the FLAMES Runtime Suite. The following updates are included:

  • An updated copy of all the FLAMES bundled component libraries. The licensing information in the original component libraries bundled with version 10.0 was inadvertently set to expire on 15 January 2012. Therefore, none ...
Continue Reading
0

FLAMES 9.1.2 Released

Huntsville, AL – January 17, 2012 – FLAMES®, version 9.1.2 has been released. This version is an incremental release that corrects a critical problem discovered in versions 9.1 and 9.1.1 of the FLAMES Runtime Suite. The following updates are included:

  • An updated copy of all the FLAMES bundled component libraries. The licensing information in the original component libraries bundled with versions 9.1 and 9.1.1 was inadvertently set to expire on 15 January 2012. ...
Continue Reading
0
Page 2 of 11 12345...»