ARA and AFRL/MN Demonstrated FLAMES at I/ITSEC 2003

Using the FLAMES architecture, Applied Research Associates (ARA) is supporting the Air Force Research Lab Munitions Directorate (AFRL/MN) in developing weapon systems for the next decade. FLAMES enabled ARA to develop system-of-systems simulation models very quickly and efficiently. In particular, the FLAMES architecture supports independent equipment modeling, allowing ARA to build models for various communications equipment, sensors, and munitions being considered for the ...

Continue Reading
0

FLAMES 5.1.1 Released

Huntsville, AL – November 17, 2003 – Ternion Corporation is pleased to announce the release of FLAMES, version 5.1.1 . Due to requests by our valued customers, we’ve added a new development license product to provide FLAMES developers with more flexibility. We’ve also made a few adjustments and enhancements to 5.1. If you currently have FLAMES version 5.1 installed, you may download 5.1.1 updates without changing your license files.

New FLAMES 5.1.1 Product:

FLAMES Shared Development License – The new shared development ...

Continue Reading
0

Ternion Corporation at Huntsville Simulation Conference 2003

The annual Huntsville Simulation Conference was held in Huntsville, Alabama on October 29 – 31, 2003.

Ternion Corporation gave a presentation at the conference on October 30 describing the technologies embodied in FLAMES that support C4I system testing and training.

View the presentation:

Technologies for Simulation-to-C4I System Interfaces

NOTE: The presentation hyperlink opens a new browser window. If you do not have PowerPoint, you can download a free ...

Continue Reading
0

Ternion Corporation at Huntsville Terrain Summit 2003

A summit was held at the Marriott Hotel in Huntsville, Alabama on Wednesday October 29, 2003 to discuss real-time synthetic environment development.

Ternion Corporation gave a presentation at the summit describing the FLAMES Advanced Correlated Terrain (FACT) and Correlated Feature options and how these options can be used in any simulation to access and perform calculations on detailed terrain databases.

View the presentation:

Using Correlated Terrain in Simulations

NOTE: The presentation hyperlink opens a new ...

Continue Reading
0

FLAMES 5.1 Released

Huntsville, AL – August 22, 2003 – Ternion Corporation is pleased to announce the release of FLAMES, version 5.1. We’ve added another option to give FLAMES even more off-the-shelf capability. We’ ve also made over 100 changes and enhancements to FLAMES, some of which are described below. See the What’s New section of the FLAMES 5.1 documentation for more details.

New FLAMES 5.1 Option:

  • FLAMES Correlated Feature Option allows your FLAMES scenarios to include data describing cultural features such as ...
Continue Reading
0

FLAMES User Group Conference (FUGC) 2003

FLAMES User Group Conference Logo

Event Details

May 12, 2003 – Kickoff Reception and Tour of Ternion Corporation’s headquarters
May 13-15, 2003
– Conference at Huntsville Marriott Hotel, 5 Tranquility Base, Huntsville, AL
May 14, 2003 – Catered Lunch & Tour at U.S. Space & Rocket Center, Huntsville, AL
May 15, 2003 – Conference at Huntsville Marriott Hotel and Water Skiing Social at Lakehouse, Lake Guntersville, AL

Agenda and Presentations

A ...

Continue Reading
0

FLAMES-Based C2WSPTT Wins Air Force Modeling and Simulation Cross-Functional Award 2003

May 9, 2003 – Ternion Corporation is pleased to announce that the 505 Training Group has won the 2002 Air Force Modeling and Simulation Cross-Functional Award with their FLAMES-based Command and Control Weapons System Part Task Trainer (C2WSPTT) Simulation. See award announcement below:

Award Type:
TEAM

Nomination Category:
USAF

Functional Area:
CROSS-FUNCTIONAL

Description of acheivements/contributions:
The Air Force Command and Control Training and Innovation Group (AFC2TIG) developed Command and Control Weapons System Part Task Trainer (C2WSPTT) ...

Continue Reading
0

Ternion Corporation at I/ITSEC 2002

Ternion Corporation participated in the 2002 Interservice/Industry Training, Simulation, & Education Conference (I/ITSEC) December 2-5 in Orlando, FL. We showcased our newest Option to FLAMES, the FLAMES Advanced Correlated Terrain (FACT), and gave a sneak preview of version 5.1 which will include the Correlated Features Option. FLAMES 5.1 is planned to be released in the spring of 2003.

In addition, we were pleased to have three of our customers in our booth, ...

Continue Reading
0

Smiths Aerospace Demonstrated FLAMES at I/ITSEC 2002

Smiths Aerospace developed the Distributed Wargaming System (DWS) used by the Taiwan Republic of China Air Force (ROCAF) for training, tactics development, and systems analysis. We appreciate their FLAMES-based demonstration at I/ITSEC 2002.

See also the “Distributed Wargaming System” PowerPoint presentation given at the FLAMES User Group Conference May 2003.

Smiths Aerospace Demonstrating FLAMES at I/ITSEC

Continue Reading
0

NATO C3 Agency Demonstrated FLAMES at I/ITSEC 2002

A big thanks goes out to our loyal customers at the NATO C3 Agency (NC3A) for demonstrating their Integrated Command and Control software for Air Operations (ICC) and their FLAMES-based ICC Training Capability (ITC).

See also the “ITC, FLAMES as an Embedded C2 Training Tool” PowerPoint presentation given at the FLAMES User Group Conference May 2003.

Continue Reading

0

FLAMES 5.0 Released

Huntsville, AL – September 6, 2002 – Ternion Corporation is pleased to announce the release of FLAMES, version 5.0. It takes major enhancements to make a version of FLAMES worthy of a first digit version number change. We think you’ ll agree that FLAMES version 5.0 is worthy of its number. Outlined below are the two new options and a few of the many enhancements.

New FLAMES 5.0 Options:

Continue Reading
0

Develop Simulations Faster with COTS Products Instead of CPFF

ETS News featured the following article in their Winter 2001-2002 Issue describing the differences between commercial-off-the-shelf (COTS) products and cost-plus-fixed-fee (CPFF) development.

COTS versus CPFF

Which offers the best value – COTS or CPFF? ETS News (Winter 2001-2002) looks at the pros and cons of these purchasing systems.

In an effort to save dollars, many U.S. Department of Defense policy-makers are promoting the use of commercial-off-the-shelf (COTS) products in lieu of customised, cost-plus-fixed-fee (CPFF) development. Theoretically COTS ...

Continue Reading
0

FLAMES 4.4 Released

FLAMES Version 4.4 Features Powerful Checkpoint/Restart Option

Huntsville, AL – September 27, 2001 – Ternion Corporation today announced the general release of FLAMES Version 4.4. FLAMES, Ternion’s FLexible Analysis and Mission Effectiveness System, is the only commercially available, open architecture simulation framework that addresses all aspects of behavioral simulation development and use.

The 4.4 release adds an extremely powerful option to FIRE, the scenario execution application of FLAMES. This option, the Checkpoint/Restart Option, collects all of the data values of an executing ...

Continue Reading
0

FLAMES 4.3 Released

FLAMES Version 4.3 Offers Enhanced Speed and Flexibility for FLAMES Users

Huntsville, AL – June 29, 2001 – Ternion Corporation today announced the general release of FLAMES Version 4.3. This release is representative of Ternion Corporation’s commitment to excellence in providing commercially available, computer-based simulation products and services.

A new pricing structure for many of the FLAMES runtime products was also unveiled, with Ternion decreasing the price of many of the FLAMES runtime products. By providing users with runtime licenses for roughly ...

Continue Reading
0

FLAMES 4.2 Released

FLAMES Version 4.2 Supports High Level Architecture (HLA)

Huntsville, AL –  April 12, 2001 – Ternion is pleased to announce the release version 4.2 of FLAMES.

By far the most important enhancement in version 4.2 is the addition of a new option, the FLAMES High Level Architecture (HLA) Option. With the HLA Option, you can:

  • Add HLA-compatibility to any FLAMES-based simulation
  • Build scenarios and execute them as a part of an HLA federation
  • Use the example software bundled with ...
Continue Reading
0

FLAMES 4.1 Released

Huntsville, AL – June 8, 2000 – FLAMES® version 4.1 has been released. Customers with active software maintenance will receive this major new release automatically.

While some of the enhancements embodied in version 4.1 are immediately obvious, many of the most exciting enhancements were made “under the hood”. These changes will make FLAMES more capable and more reliable than ever, lay the foundation for the enhancements planned for future versions, and continue to increase the distinction between FLAMES and competing products. ...

Continue Reading
0
Page 12 of 12 «...89101112