Termination of No-Cost Runtime Licenses

January 8, 2016 – Beginning in December of 2008 with version 8.0 of FLAMES and up through version 13.0 of FLAMES, licenses to most FLAMES runtime products were available at no cost. The termination clause of the License Agreement that accompanied and governed the use of these products stated, in part,

“Ternion may terminate this Agreement at any time.”

Ternion has decided to exercise this clause and to discontinue the no-cost runtime license program. Effective immediately, all licenses to version 8.0 through ...

Continue Reading
0

FLAMES 14.0 Released

Huntsville, AL – November 30, 2015 – Ternion® Corporation is pleased to announce the release of FLAMES®, version 14.0. This new version of FLAMES is loaded with enhancements that simplify the development of FLAMES-based simulations, make those simulations more capable, and make all FLAMES applications easier and more enjoyable to use.

FLAMES 14.0 Enhancements

Some of the most significant enhancements in version 14.0 are summarized below. See the What’s New section of the FLAMES documentation for additional details on these and other enhancements.

Scenario Explorer. ...

Continue Reading
0

Ternion® Featured on Discovery Channel

Ternion® Corporation was featured in an episode of Innovations with Ed Begley Jr., which aired initially on Discovery Channel in the United States on September 23, 2015. The episode described how Ternion’s FLAMES®-based, embedded training simulations are improving the combat-readiness of command and control system operators and saving taxpayers millions of dollars at the same time.

Click above to watch the portion of the episode in which Ternion was featured (6:43 in duration).

About Innovations and DMG Productions:
Innovations, ...

Continue Reading
0

Ternion Corporation Attends I/ITSEC 2015

Ternion® Corporation at IITSEC 2015Ternion® Corporation enjoyed another successful show at I/ITSEC 2015 in Orlando, FL. This year, Ternion’s exhibit focused on the newest features of FLAMES® 14.0 and gave demonstrations of FLAMES-based simulations. Ternion also showed off a variety of FLAMES-based C4I training solutions, including the Command and Control Weapon System Part Task Trainer (C2WSPTT) as well as the FLAMES Automated Simulation Trainer (FAST™), Ternion’s ...

Continue Reading
0

Ternion® Corporation at ITEC 2015

ITEC Show Information

ITEC 2015Ternion® Corporation exhibited at the International Training and Education Conference (ITEC) show in Prague, Czech Republic. In addition to demonstrating all the features of the latest version of FLAMES®, Ternion also demonstrated the FLAMES Automated Simulation Trainer (FAST™), the newest member of the FLAMES product family. FAST is an off-the-shelf simulation designed to interact directly with C4ISR systems to support operator training, and it ...

Continue Reading
0

FLAMES 13.0 Released

Huntsville, AL – November 25, 2014 – Ternion® Corporation is pleased to announce the release of FLAMES®, version 13.0, which introduces a new and dramatically improved user interface to most FLAMES applications. The new user interface and the other enhancements included in version 13.0 make FLAMES easier and more enjoyable to use and, more importantly, will make you more productive creating, executing, visualizing, and controlling FLAMES scenarios.

FLAMES 13.0 Enhancements

Some of the most significant enhancements in version 13.0 are summarized below. ...

Continue Reading
0

Innovations with Ed Begley, Jr. to Feature Ternion® Corporation in 2015 Via Discovery Channel

DMG Productions explores the latest breakthroughs in modeling, simulation, and training.

Huntsville, AL – November 25, 2014 – Ternion® Corporation announced that they will be featured in an upcoming episode of Innovations with Ed Begley Jr., airing initially via Discovery Channel in the United States on September 23, 2015 at 7:30 am ET and 7:30 am.

Ternion Corporation is a small business headquartered in Huntsville, Alabama: an area known as a major high-tech center in the U.S.

The Software ...

Continue Reading
0

2014 Breakfast with Ternion Corporation

Ternion® Corporation hosted its traditional breakfast during the 2014 I/ITSEC Conference. At the event, Ternion’s president, Brad Spearing, delivered a presentation on the features of FLAMES version 13.0, as well as discussed recent enhancements to the newest member of the FLAMES product line, the FLAMES Automated Simulation Trainer (FAST™), Ternion’s commercial off-the-shelf solution for C4I system training.

Each attendee received a free, permanent license and installation DVD for the FLAMES 13.0 Runtime Suite.

Event ...

Continue Reading
0

Ternion Corporation Attends I/ITSEC 2014

Ternion® Corporation had another successful visit to Orlando, FL for I/ITSEC 2014 and Breakfast with Ternion. This year, Ternion’s exhibit focused on showing off the enhanced interface of the new FLAMES® 13.0, developing deployable custom C4I training solutions, and demonstrating Ternion’s commercial off-the-shelf solution for C4I system training, the FLAMES Automated Simulation Trainer (FAST™).

Event Details

December 1-4, 2014
Orange County Convention Center – South Hall
9860 Universal Boulevard
Orlando, FL 32819
Ternion Booth #701

Highlights from I/ITSEC 2014

FLAMES 13.0

Ternion showed off the new user ...

Continue Reading
0

FLAMES 12.0.2 Released

Huntsville, AL – September 10, 2014 – Ternion® Corporation released FLAMES®, version 12.0.2. This version is an incremental release correcting minor issues found since FLAMES version 12.0.1. The following updates are included.

  • Updates to the Enhanced 3D Scene Importer to make it compatible with output generated by version 6.2.3 of TerraVista.
  • Updates to the software that processes experiment files to correctly read lines of text that are more than 1,000 characters long.
  • Adding support for the FViewOverlayGetName ...
Continue Reading
0

FLAMES 12.0.1 Released

Huntsville, AL – March 31, 2014 – Ternion® Corporation is pleased to announce the release of FLAMES®, version 12.0.1. This version is an incremental release which adds valuable enhancements and minor corrections to FLAMES version 12.0. The following updates are included. See the What’s New section of the FLAMES documentation for additional details on these and other updates. 

Support for International Characters. Create Units, commands, patterns and more in your own language! On Windows® computers, FLAMES graphical applications now allow you to enter international characters in ...

Continue Reading
0

Ternion Corporation at I/ITSEC 2013

Ternion at I/ITSEC 2013

Ternion Corporation® enjoyed another successful show at I/ITSEC 2013! Ternion’s exhibit at I/ITSEC 2013 focused on the newest features of FLAMES® 12.0 and gave demonstrations of FLAMES-based simulations. A demonstration of Ternion’s FLAMES Automated Simulation Trainer (FAST™) was on display at Ternion’s booth. Additionally, the FLAMES-based Command and Control Weapon System Part Task Trainer (C2WSPTT) was demonstrated at this year’s show.

Event Details:

December 2-5, 2013
Orange County Convention Center – South Hall
9800 ...

Continue Reading
0

2013 Breakfast with Ternion Corporation

Ternion Corporation® and the FLAMES User Group hosted a breakfast during the 2013 I/ITSEC Conference. At the event, Ternion’s president, Brad Spearing, delivered a presentation on FLAMES. Each attendee received a free, permanent license and installation DVD for the FLAMES 12.0 Runtime Suite.

Event Details:

Tuesday, December 3, 2013, from 9:00 – 10:30 a.m.
Rosen Centre Hotel, Level 2, Salons 3&4, Orlando, Florida

Presentation Highlights:

  • Overview of the new features added in
Continue Reading
0

FLAMES 12.0 Released

Huntsville, AL – December 2, 2013 – Ternion® Corporation is pleased to announce the release of FLAMES®, version 12.0. This new version includes well over 100 changes and enhancements that make it the most powerful and easy-to-use version of FLAMES ever released.

FLAMES 12.0 Enhancements

Some of the most significant enhancements in version 12.0 are summarized below. See the What’s New section of the FLAMES documentation for additional details on these and other enhancements.

User Interface Enhancements. Many enhancements have been made to ...

Continue Reading
0

Ternion Awarded Place in MT2 Top Simulation & Training List 2013

MT2's Top Simulation & Training Companies

September 2013 – For the eleventh year in a row, Military Training Technology (MT2) magazine recognized Ternion Corporation on its prestigious Top Simulation & Training Companies List. The awarded Core Competencies areas included Constructive Simulation, Software and Training Services.

The publication first presented this honor to Ternion Corporation in 2003.

Read more at Military Training Technology ...

Continue Reading
0

FLAMES 11.0.2 Released

Huntsville, AL – July 26, 2013  FLAMES® version 11.0.2 has been released. This version is an incremental release correcting minor issues found in the FLAMES Runtime Suite since version 11.0.1 was released. The following updates are included:

  • All the updates included in version 11.0.1
  • A correction to a problem that intermittently caused a crash in FORGE when working with pattern parameters
  • A correction to intermittent problems with the zoom slider in the 2D view in ...
Continue Reading
0

Ternion Announces New Academic License Program

June 27, 2013 – Ternion Corporation is now providing free licenses to the Premier configuration of the FLAMES Development Suite for qualifying educational institutions under its new FLAMES University/Education License (FUEL) program.

FUEL is intended to get FLAMES into the classroom and help students prepare for careers in modeling and simulation. FUEL is free to qualified educational institutions and only $99 a year for qualified students wishing to use FLAMES on their ...

Continue Reading
0

Ternion Corporation at ITEC 2013

Ternion Corporation exhibited FLAMES at the International Training and Education Conference (ITEC) show in Rome, Italy.

ITEC Show Information

May 22-24, 2013
Stand D142
Fiera di Roma in Italy

Learn more about ITEC

Meet with Ternion at ITEC 2013

Thank you to everyone who met with us at ITEC 2013! We enjoyed discussing your specific project requirements and the many ways that FLAMES can benefit your company.

Continue Reading
0

FLAMES 11.0.1 Released

Huntsville, AL – March 15, 2013 – The Ternion Corporation released FLAMES®, version 11.0.1. This version is an incremental release correcting minor issues found in the FLAMES Runtime Suite since version 11.0 was released. The following updates are included:

  • Updated copies of main FLAMES dynamic/shared runtime library and some of the bundled component libraries. This corrects some minor issues that were discovered since the release of version 11.0.
  • Updates to make use of version 4.8.4 of the Qt ...
Continue Reading
0

Finnish Naval Research Institute Selects FLAMES for Operational Analysis

December 13, 2012 – The Finnish Naval Research Institute (FNRI) purchased FLAMES development licenses to support operational analysis and collaboration with other organizations related to the Finnish Defence Forces.

The Naval Research Institute specialises in underwater military research supporting the development of the Navy and in testing the newest technology used in the Navy (Espoo).

Continue Reading
0

2012 Breakfast with Ternion Corporation

Ternion Corporation and the FLAMES User Group hosted a breakfast during the 2012 I/ITSEC Conference. At the event, Ternion’s president, Brad Spearing, delivered a presentation on FLAMES. Each attendee received a free, permanent license and installation DVD for the FLAMES 11.0 Runtime Suite.

Event Details:
Tuesday, December 4, 2012, from 9:00 – 10:30 a.m.
Rosen Centre Hotel, Level 2, Salons 3&4, Orlando, Florida

Presentation Highlights:

  • Introduction to FLAMES
  • Overview of the new ...
Continue Reading
0

Diamond Visionics’ GenesisRTX IG Interfaces with FLAMES

Tucson, AZ – December 3, 2012Cogent3D, Inc. announced that Diamond Visionics (DVC) has interfaced its GenesisRTX™ image generator (IG) with Ternion’s FLAMES® FORGE/FIRE software with its new CIGI functionality to drive moving models in GenesisRTX IG’s high-density scenarios.

GenesisRTX IG provides high-fidelity, real-time image generation without requiring off-line terrain database generation, dynamically constructing 3D scenes at run-time directly from GIS source data. This affords GenesisRTX customers cost savings over the ...

Continue Reading
0

Ternion Corporation at I/ITSEC 2012

Ternion’s exhibit at I/ITSEC 2012 focused on real world applications of FLAMES-based simulations. A demonstration of Ternion’s FLAMES-based Air Defense Systems Integrator (ADSI®) training simulation was on display at Ternion’s booth. Additionally, the FLAMES-based Command and Control Weapon System Part Task Trainer (C2WSPTT) was demonstrated at this year’s show.

Event Details:

December 3-6, 2012
Orange County Convention Center – West Building
9800 International Drive, Orlando, FL, USA
Ternion Booth #1471

Highlights from I/ITSEC 2012:

Field Deployable ADSI Training System

The exhibit ...

Continue Reading
0

FLAMES 11.0 Released

Huntsville, AL – November 30, 2012 – Ternion® Corporation is pleased to announce the release of FLAMES®, version 11.0. This new version includes many enhancements that simplify the development of custom models. FLAMES users will also benefit from several enhancements that make scenarios easier to create and execute.

FLAMES 11.0 Enhancements

Version 11.0 includes enhancements in over 75 areas. Some of the most significant enhancements are summarized below. See the What’s New section of the FLAMES documentation for additional details on these ...

Continue Reading
0
Page 1 of 10 12345...»